Welcome to Company official website!

|   中文

>
Sand making Equipment
>
Sand-Making Production Line

Sand-Making Production Line

【Abstract】:
Sand-Making Production Line We have several sand production linesHourly output: 300-350 tons of Limestone Sand-Making Production LineConfiguration listEquipmentModelNumberVibrating FeederGZD1300×4 ...

Sand-Making Production Line

        We have several sand production lines

Hourly output: 300-350 tons of Limestone Sand-Making Production Line

Configuration list

Equipment

Model

Number

Vibrating Feeder

GZD1300×4900

1

Jaw Crusher

PE900×1200

1

Circular Vibrating Screen

3YZS2460

1

Vertical Shaft Impact Crusher

PL1300

1

Circular Vibrating Screen

3YKS2460

1

300-350 tons of limestone sand making equipment per hour. The stone is blasted down from the mountain, and the stone less than 750mm is sent to the vibrating feeder through the dump truck, and the vibrating feeder evenly sends the stone to the jaw crusher, which breaks the stone in the first step, and the stone from the jaw crusher is about 95mm-165mm, which is sent to the European type jaw crusher through the leather belt conveyor for the second step, The materials larger than 40mm are returned to the impact crusher through the circular vibrating screen and broken again, and the stones less than 40mm are sent to the sand making machine. Finally, the materials are graded and screened through the circular vibrating screen, and the materials larger than the finished products are returned to the sand making machine for crushing again, and the finished products are transported to the finished product area by the belt conveyor.

Note: when the feed is 40mm-300mm, the material will directly enter the European type jaw crusher for impact crushing, instead of the first step in front. When the material is less than 40mm, it will directly enter the sand making machine for crushing, instead of the first step and the second step in front.

Hourly output: 200-250t Granite Sand-Making Production Line 

Configuration list

Equipment

Model

Number

Vibrating Feeder

GZD1100×4200

1

Cone Crusher

PSG2100

1

Circular Vibrating Screen

3YZS2160

1

Vertical Shaft Impact Crusher

PL1200

2

Circular Vibrating Screen

2YKS2460

1

200-250 tons of river pebble sand making equipment per hour, The stones less than 210mm are sent to the vibrating feeder through the dump truck, The vibrating feeder evenly feeds the stone into the CS high-efficiency spring cone crusher, After the first crushing of the stone by the Cone crusher, the stone larger than 40mm is returned to the Cone crusher through the Circular vibrating screen and crushed again, and the stone below 40mm is sent to the sand making machine. Finally, the finished material is classified and screened by a circular vibrating screen and conveyed to the finished product area by a belt conveyor.

Note: when the feed is less than 40mm, it will directly enter the sand making machine for crushing, instead of the first step in front.

All equipment in the production line can be used and sold individually.

Hourly output: 150-200t Limestone Sand-Making Production Line

Configuration list

Equipment

Model

Number

Vibrating Feeder

GZD1100×4200

1

Jaw Crusher

PE750×1060

1

Impact Crusher

PF1315

1

Circular Vibrating Screen

3YKS2160

1

Vertical Shaft Impact Crusher

PL1200

1

Circular Vibrating Screen

3YKS2460

1

150-200 tons of limestone sand making equipment per hour, the stone is blasted from the mountain, and the stone less than 630mm is sent to the vibrating feeder by the dump truck. The vibrating feeder sends the stone evenly to the Jaw Crusher; the Jaw Crusher crushes the stone in the first stage. The stone broken from the jaw crusher is about 80mm-160mm. It is sent to the European type jaw crusher by a belt conveyor to be crushed in the second stage. The stone larger than 40mm is returned through the circular vibrating screen. The stone below 40mm is fed into the sand making machine. Finally, the finished material is classified and screened by a circular vibrating screen, and the material larger than the finished product is returned to the sand making machine to be broken again.

Note: when the feed is 40mm-300mm, the material will directly enter the European type jaw crusher for crushing, instead of the first step in front. When the material is less than 40mm, it will directly enter the sand making machine for crushing, instead of the first step and the second step in front.

 

Sand making Equipment
XILINGXUE

Contact Us

Tel:13939106995
QQ:932535144
E-mail:westmountainsnow@163.com
Address: Zhangwangzhuang Middle Village, Wenxian County, Jiaozuo City, Henan Province, China

Copyright © 2019  河南西岭雪机电科技有限公司 豫ICP备19045651号  TAIJIWANG Provide technical support